Windows 10 Guide

How to Fix ACPI_BIOS_ERROR in Windows 10

Here are looking into fix ACPI_BIOS_ERROR in Windows 10. Usually after you have installed a new software or hardware in your Windows 10 PC, the ACPI_BIOS_ERROR surfaces. This error may also appear while you are installing some program. The error refers that the Advanced Configuration and Power Interface (ACPI) BIOS of the PC is not fully compliant with the ACPI specification.

How to Fix ACPI_BIOS_ERROR in Windows 10

Pre-requisites: A bootable Windows 10 installation DVD (or USB)

How to Fix ACPI_BIOS_ERROR in Windows 10

Follow the steps if you are unable to boot the PC normally else skip this set of steps and go to the next section.

  1. Connect the bootable disk or USB and reboot your PC
  2. Click on Next when it starts and show the next button
  3. Click on Repair your computer
  4. Click Troubleshoot
  5. Then click on Advanced Options
  6. Click Startup Settings
  7. Now click on Restart on the bottom-right
  8. Once the system reboots, select Safe Mode with Networking
  9. Go to the last section of this article BIOS Driver Update.

Follow the steps mentioned below if your are able to boot your PC normally.

  1. Attach the bootable disk or USB and restart the computer, wait for it to start.
  2. After booting click on the Next
  3. Select Repair your computer
  4. Click Troubleshoot
  5.  Step 5: Click Advanced Options
  6.  Step 6: Click Startup Repair
  7.  Step 7: Follow the screen instructions to complete the process.
  8.  This method will fix the automatic booting, if this method didn’t work then go with the method 2.

BIOS Driver Update: Once Done, you need to BIOS Driver.

  1. After booting Windows 10 into safe mode
  2. Download the appropriate Drivers from the PC or laptop manufacturers website
  3. Install the BIOS driver to fix the ACPI_BIOS_ERROR 

Now the ACPI_BIOS_ERROR should be solved. That’s all about how to fix ACPI_BIOS_ERROR in Windows 10.  Check out How to Enable Share UI Windows 10 Wireless Insiders.